How to use portable gas cylinders and gas cylinders outdoors
Release time:
2025-03-21
The filling suitable for portable gas cylinders should be a mixture of propane, butane, and isobutane.
Did you choose the right gas cylinder?
Portable gas cylinders refer to gas cylinders suitable for high-altitude and low-temperature environments. The filling suitable for portable gas cylinders should be a mixture of propane, butane, and isobutane. Different fillers have different boiling point characteristics, which is a reference for readers when purchasing gas cylinders. However, the gas cylinders on the market are a mixture of these three types of fillers, and the brand ratio of each cylinder is different. Propane: Boiling point is approximately -42.1 ℃.
Butane: Boiling point is approximately -0.5 ℃.
If the wrong gas cylinder is used at the wrong temperature, it may cause the cylinder to stop. For example, in high-altitude camping, purchasing butane gas cylinders can cause food with a small stove to become undercooked because the ambient temperature is close to boiling point.
2. Gas cylinders are afraid of heat
Due to the popularity of outdoor hiking in recent years, many travelers enjoy cooking tea and eating in the mountains, and using the wrong methods can lead to gas cylinder explosions. One of them was boiling water on the windshield for nearly 2 hours, which caused excessive pressure and explosion in the gas tank due to high temperature.
Therefore, we urge friends in mountainous areas who have a habit of using windshields to leave some gaps when using them. When cooking food, be sure to pay attention to the temperature and avoid placing the gas cylinder in an environment above 50 degrees Celsius. However, you don't know how much he cooked on the mountain. You can only pay as much attention to cooking time as possible.
3. Install a gas cylinder and avoid getting too close to a fire source
A gas cylinder is a liquid container, but it is a gas at room temperature, so when the gas valve is opened, gas will be sprayed out and then ignited to cook. However, it should be noted that during the process of connecting the furnace head to the gas cylinder, the gas cylinder must be placed in the correct position and cannot be placed on one side or on the side of the hand, as liquid may flow out or leak if installed tightly, indirectly causing accidents
Contact Us
Email：frank@lyxinqiu.com
WhatsApp：+8613013510045
Tel：+86-539-8888956
HQ Address： hongru international department,Lanshan district,Linyi city,Shandong province,China(mainland).
Request a Quick Quote